ArticleslgStudy

physics

Tidal power

Tidal power is a physics topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Tidal power rather than just read about it. In short: Tidal power or tidal energy is harnessed by converting energy from tides into useful forms of power, mainly electricity using various methods. Although not yet widely used, tidal energy has the potential for future electricity generation.

Tidal power — main illustration
Tidal power — illustration

Key takeaways

  • Tidal power belongs to physics; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Tidal power to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Tidal power from memory before moving on to harder problems.

Reference excerpt

Tidal power or tidal energy is harnessed by converting energy from tides into useful forms of power, mainly electricity using various methods. Although not yet widely used, tidal energy has the potential for future electricity generation. Tides are more predictable than the wind and the sun. Among sources of renewable energy, tidal energy has traditionally suffered from relatively high cost and limited availability of sites with sufficiently high tidal ranges or flow velocities, thus constricting its total availability. However many recent technological developments and improvements, both in design (e.g. dynamic tidal power, tidal lagoons) and turbine technology (e.g. new axial turbines, cross flow turbines), indicate that the total availability of tidal power may be much higher than previously assumed and that economic and environmental costs may be brought down to competitive levels. Historically, tide mills have been used both in Europe and on the Atlantic coast of North America. Incoming water was contained in large storage ponds, and as the tide goes out, it turns waterwheels that use the mechanical power to mill grain. The earliest occurrences date from the Middle Ages, or even from Roman times. The process of using falling water and spinning turbines to create electricity was introduced in the U.S. and Europe in the 19th century. Electricity generation from marine technologies increased an estimated 16% in 2018, and an estimated 13% in 2019. Policies promoting R&D are needed to achieve further cost reductions and large-scale development. The world's first large-scale tidal power plant was France's Rance Tidal Power Station, which became operational in 1966. It was the largest tidal power station in terms of output until Sihwa Lake Tidal Power Station opened in South Korea in August 2011. The Sihwa station uses sea wall defense barriers complete with 10 turbines generating 254 MW.

Principle

Tidal energy is taken from the Earth's oceanic tides. Tidal forces result from periodic variations in gravitational attraction exerted by celestial bodies. These forces create corresponding motions or currents in the world's oceans. This results in periodic changes in sea levels, varying as the Earth rotates. These changes are highly regular and predictable, due to the consistent pattern of the Earth's rotation and the Moon's orbit around the Earth. The magnitude and variations of this motion reflect the changing positions of the Moon and Sun relative to the Earth, the effects of Earth's rotation, and local geography of the seafloor and coastlines. Tidal power is the only technology that draws on energy inherent in the orbital characteristics of the Earth–Moon system, and to a lesser extent in the Earth–Sun system. Other natural energies exploited by human technology originate directly or indirectly from the Sun, including fossil fuel, conventional hydroelectric, wind, biofuel, wave and solar energy. Nuclear energy makes use of Earth's mineral deposits of fissionable elements, while geothermal power utilizes the Earth's internal heat, which comes from a combination of residual heat from planetary accretion (about 20%) and heat produced through radioactive decay (80%). A tidal generator converts the energy of tidal flows into electricity. Greater tidal variation and higher tidal current velocities can dramatically increase the potential of a site for tidal electricity generation. On the other hand, tidal energy has high reliability, excellent energy density, and high durability. Because the Earth's tides are ultimately due to gravitational interaction with the Moon and Sun and the Earth's rotation, tidal power is practically inexhaustible, and is thus classified as a renewable energy resource. Movement of tides causes a loss of mechanical energy in the Earth-Moon system: this results from pumping of water through natural restrictions around coastlines and consequent viscous dissipation at the seabed and in turbulence. This loss of energy has caused the rotation of the Earth to slow in the 4.5 billion years since its formation. During the last 620 million years the period of rotation of the Earth (length of a day) has increased from 21.9 hours to 24 hours; in this period the Earth-Moon system has lost 17% of its rotational energy. While tidal power will take additional energy from the system, the effect is negligible and would not be noticeable in the foreseeable future.

Methods

Tidal power can be classified into four generating methods:

Tidal stream generator

Tidal stream generators make use of the kinetic energy of moving water to power turbines, in a similar way to wind turbines that use the wind to power turbines. Some tidal generators can be built into the structures of existing bridges or are entirely submersed, thus avoiding concerns over aesthetics or visual impact. Land constrictions such as straits or inlets can create high velocities at specific sites, which can be captured using turbines. These turbines can be horizontal, vertical, open, or ducted.

Tidal barrage

Tidal barrages use potential energy in the difference in height (or hydraulic head) between high and low tides. When using tidal barrages to generate power, the potential energy from a tide is seized through the strategic placement of specialized dams. When the sea level rises and the tide begins to come in, the temporary increase in tidal power is channeled into a large basin behind the dam, holding a large amount of potential energy. With the receding tide, this energy is then converted into mechanical energy as the water is released through large turbines that create electrical power through the use of generators. Barrages are essentially dams across the full width of a tidal estuary.

… excerpt ends here. Continue reading the full article.

Illustrations

Tidal power: Sihwa Lake Tidal Power Station, located in Gyeonggi Province, South Korea, is the world's largest tidal power installation, with a total power output capacity of 254 MW.
Sihwa Lake Tidal Power Station, located in Gyeonggi Province, South Korea, is the world's largest tidal power installation, with a total power output capacity of 254 MW.
Tidal power: The Rance Tidal Power Station, in Brittany, northwestern France, was the first large-scale tidal power station (1966), with a total power output capacity of 240 MW
The Rance Tidal Power Station, in Brittany, northwestern France, was the first large-scale tidal power station (1966), with a total power output capacity of 240 MW
Tidal power illustration
Tidal power illustration
Tidal power: Variation of tides over a day
Variation of tides over a day

Worked examples

Example 1 — a first encounter with Tidal power

Start with the simplest possible case. Write down what Tidal power claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In physics, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Tidal power before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Tidal power ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Tidal power

In research
Tidal power appears in physics research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Tidal power in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Tidal power is common in secondary-school and first-year university syllabi. It links to neighbouring topics Bright green environmentalism, Coastal construction, Renewable energy, so understanding it makes those chapters shorter.
In everyday life
Look for Tidal power outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Tidal power in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Tidal power means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Tidal power out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Tidal power in simple terms?

Tidal power or tidal energy is harnessed by converting energy from tides into useful forms of power, mainly electricity using various methods. Although not yet widely used, tidal energy has the potential for future electricity generation.

Why does Tidal power matter?

Because it connects several physics ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Tidal power?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Tidal power.

Tags

  • Bright green environmentalism
  • Coastal construction
  • Renewable energy
  • Tidal power
  • Tides

Keep exploring