ArticleslgStudy

computer science

Trench code

Trench code is a computer science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Trench code rather than just read about it. In short: Trench codes (a form of cryptography) were codes used for secrecy by field armies in World War I. Messages by field telephone, radio and carrier pigeons could be intercepted, hence the need for tactical World War I cryptography.

Trench code — main illustration
Trench code — illustration

Key takeaways

  • Trench code belongs to computer science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Trench code to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Trench code from memory before moving on to harder problems.

Reference excerpt

Trench codes (a form of cryptography) were codes used for secrecy by field armies in World War I. Messages by field telephone, radio and carrier pigeons could be intercepted, hence the need for tactical World War I cryptography. Originally, the most commonly used codes were simple substitution codes, but due to the relative vulnerability of the classical cipher, trench codes came into existence. (Important messages generally used alternative encryption techniques for greater security.) The use of these codes required the distribution of codebooks to military personnel, which proved to be a security liability since these books could be stolen by enemy forces. By the middle of World War I the conflict had settled down into a static battle of attrition, with the two sides sitting in huge lines of fixed earthwork fortifications. With armies generally immobile, distributing codebooks and protecting them was easier than it would have been for armies on the move. However, armies were still in danger of trench-raiding parties who would sneak into enemy lines and try to snatch codebooks. When this happened, an alarm could be raised and a code quickly changed. Trench codes were changed on a regular basis in an attempt to prevent code breakers from deciphering messages.

French Army The French Army began to develop trench codes in early 1916. They started as telephone codes, implemented at the request of a general whose forces had suffered devastating artillery barrages due to indiscretions in telephone conversations between his men. The original telephone code featured a small set of two-letter codewords that were spelled out in voice communications. This grew into a three-letter code scheme, soon adopted for wireless, with early one-part code implementations evolving into more secure two-part code implementations. The British began to adopt trench codes as well.

German Army The Imperial German Army started using trench codes in the spring of 1917, evolving into a book of 4,000 codewords that were changed twice a month, with different codebooks used on different sectors of the front. French codebreakers were extremely competent at cracking ciphers but were somewhat inexperienced at cracking codes, which require a slightly different mindset. It took them time to get to the point where they were able to crack the German codes in a timely fashion.

U.S. troops The Americans were relative newcomers to cryptography when they entered the war, but they did have their star players. One was Parker Hitt, b. 1878, who before the war had been an Army Signal Corps instructor. He was one of the first to try to bring US Army cryptology into the 20th century, publishing an influential short work on the subject in 1915 called the Manual for the solution of military ciphers. He was assigned to France in an administrative role, but his advice was eagerly sought by colleagues working in operational cryptology. Another Signal Corps officer who would make his mark on cryptology was Joseph Mauborgne, who in 1914, as a first lieutenant, had been the first to publish a solution to the Playfair cipher. When the Americans began moving up to the front in numbers in early 1918, they adopted trench codes and became very competent at their construction, with a Captain Howard R. Barnes eventually learning to produce them at a rate that surprised British colleagues. The Americans adopted a series of codes named after rivers, beginning with "Potomac". They learned to print the codebooks on paper that burned easily and degraded quickly after a few weeks, when the codes would presumably be obsolete, while using a typeface that was easy to read under trench conditions.

Communications discipline American code makers were often frustrated by the inability or refusal of combat units to use the codes—or worse, to use them properly. Lt. Col. Frank Moorman, reviewing U.S wireless intelligence in 1920. wrote:

That will be the real problem for the future, to make the men at the front realize the importance of handling codes carefully and observing "foolish" little details that the code man insists on. They cannot see the need of it and they do not want to do it. They will do anything they can to get out of it. My idea would be to hang a few of the offenders. This would not only get rid of some but would discourage the development of others. It would be a saving of lives to do it. It is a sacrifice of American lives to unnecessarily assist the enemy in the solution of our code.

Example Below are pages from a U.S. Army World War I trench code, an edition designated as "Seneca:"

References This article, or an earlier version of it, incorporates material from Greg Goebel's Codes, Ciphers, & Codebreaking.

Illustrations

Trench code illustration
Trench code illustration
Trench code illustration

Worked examples

Example 1 — a first encounter with Trench code

Start with the simplest possible case. Write down what Trench code claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In computer science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Trench code before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Trench code ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Trench code

In research
Trench code appears in computer science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Trench code in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Trench code is common in secondary-school and first-year university syllabi. It links to neighbouring topics History of cryptography, Signals intelligence of World War I, so understanding it makes those chapters shorter.
In everyday life
Look for Trench code outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Trench code in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Trench code means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Trench code out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Trench code in simple terms?

Trench codes (a form of cryptography) were codes used for secrecy by field armies in World War I. Messages by field telephone, radio and carrier pigeons could be intercepted, hence the need for tactical World War I cryptography.

Why does Trench code matter?

Because it connects several computer science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Trench code?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Trench code.

Tags

  • History of cryptography
  • Signals intelligence of World War I

Keep exploring