ArticleslgStudy

science

Twistronics

Twistronics is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Twistronics rather than just read about it. In short: Twistronics (from twist and electronics) is the study of how the angle (the twist) between layers of two-dimensional materials can change their electrical properties. Materials such as bilayer graphene have been shown to have vastly different electronic behavior, ranging from non-conductive to superconductive, that depends sensitively on the angle between the layers.

Twistronics — main illustration
Twistronics — illustration

Key takeaways

  • Twistronics belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Twistronics to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Twistronics from memory before moving on to harder problems.

Reference excerpt

Twistronics (from twist and electronics) is the study of how the angle (the twist) between layers of two-dimensional materials can change their electrical properties. Materials such as bilayer graphene have been shown to have vastly different electronic behavior, ranging from non-conductive to superconductive, that depends sensitively on the angle between the layers. The term was first introduced by the research group of Efthimios Kaxiras at Harvard University in their theoretical treatment of graphene superlattices. Pablo Jarillo-Herrero, Allan H. MacDonald and Rafi Bistritzer were awarded the 2020 Wolf Prize in Physics for their theoretical and experimental work on twisted bilayer graphene.

History In 2007, National University of Singapore physicist Antonio H. Castro Neto hypothesized that pressing two misaligned graphene sheets together might yield new electrical properties, and separately proposed that graphene might offer a route to superconductivity, but he did not combine the two ideas. In 2010 researchers in Eva Andrei's laboratory at Rutgers University in Piscataway, New Jersey, discovered twisted bilayer graphene through its defining moiré pattern and demonstrating that the twist angle has a strong effect on the band structure by measuring greatly renormalized van Hove singularities. Also in 2010 researchers from Federico Santa María Technical University in Chile found that for a certain angle close to 1 degree the band of the electronic structure of twisted bilayer graphene became completely flat, and because of that theoretical property, they suggested that collective behavior might be possible. In 2011 Allan H. MacDonald (of University of Texas at Austin) and Rafi Bistritzer using a simple theoretical model found that for the previously found "magic angle" the amount of energy a free electron would require to tunnel between two graphene sheets radically changes. In 2017, the research group of Efthimios Kaxiras at Harvard University used detailed quantum mechanics calculations to reduce uncertainty in the twist angle between two graphene layers that can induce extraordinary behavior of electrons in this two-dimensional system. In 2018, Pablo Jarillo-Herrero, an experimentalist at Massachusetts Institute of Technology, found that the magic angle resulted in the unusual electrical properties that MacDonald and Bistritzer had predicted. At 1.1 degrees rotation at sufficiently low temperatures, electrons move from one layer to the other, creating a lattice and the phenomenon of superconductivity. Publication of these discoveries has generated a host of theoretical papers seeking to understand and explain the phenomena as well as numerous experiments using varying numbers of layers, twist angles and other materials. Subsequent works showed that electronic properties of the stack can also be strongly dependent on heterostrain especially near the magic angle allowing potential applications in straintronics.

Characteristics

Superconduction and insulation The theoretical predictions of superconductivity were confirmed by Pablo Jarillo-Herrero and his student Yuan Cao of MIT and colleagues from Harvard University and the National Institute for Materials Science in Tsukuba, Japan. In 2018 they verified that superconductivity existed in bilayer graphene where one layer was rotated by an angle of 1.1° relative to the other, forming a moiré pattern, at a temperature of 1.7 K (−271.45 °C; −456.61 °F). They created two bilayer devices that acted as an insulator instead of a conductor without a magnetic field. Increasing the field strength turned the second device into a superconductor. A further advance in twistronics is the discovery of a method of turning the superconductive paths on and off by application of a small voltage differential.

Heterostructures Experiments have also been done using combinations of graphene layers with other materials that form heterostructures in the form of atomically thin sheets that are held together by the weak Van der Waals force. For example, a study published in Science in July 2019 found that with the addition of a boron nitride lattice between two graphene sheets, unique orbital ferromagnetic effects were produced at a 1.17° angle, which could be used to implement memory in quantum computers. Further spectroscopic studies of twisted bilayer graphene revealed strong electron-electron correlations at the magic angle.

Electron puddling Between 2-D layers for bismuth selenide and a dichalcogenide, researchers at the Northeastern University in Boston, discovered that at a specific degrees of twist a new lattice layer, consisting of only pure electrons, would develop between the two 2-D elemental layers. The quantum and physical effects of the alignment between the two layers appears to create "puddle" regions which trap electrons into a stable lattice. Because this stable lattice consists only of electrons, it is the first non-atomic lattice observed and suggests new opportunities to confine, control, measure, and transport electrons.

Ferromagnetism A three layer construction, consisting of two layers of graphene with a 2-D layer of boron nitride, has been shown to exhibit superconductivity, insulation and ferromagnetism. In 2021, this was achieved on a single graphene flake.

See also Spintronics – the study of the intrinsic spin of the electron and its associated magnetic moment in solid-state devices Straintronics – a method for altering the properties of two-dimensional materials by introducing controlled stress Valleytronics – the study of local extrema, valleys, in the electronic band structure of semiconductors

References

Illustrations

Twistronics: Atomic scale moiré pattern created by overlapping two skewed sheets of graphene, a hexagonal lattice composed of carbon atoms.
Atomic scale moiré pattern created by overlapping two skewed sheets of graphene, a hexagonal lattice composed of carbon atoms.
Twistronics: A twistronics animation. Here, we have 2 overlaid sheets, one of which rotates a total of 90 degrees. We see that as the angle of rotation changes, so does the periodicity.
A twistronics animation. Here, we have 2 overlaid sheets, one of which rotates a total of 90 degrees. We see that as the angle of rotation changes, so does the periodicity.

Worked examples

Example 1 — a first encounter with Twistronics

Start with the simplest possible case. Write down what Twistronics claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Twistronics before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Twistronics ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Twistronics

In research
Twistronics appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Twistronics in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Twistronics is common in secondary-school and first-year university syllabi. It links to neighbouring topics Graphene, Superconductivity, so understanding it makes those chapters shorter.
In everyday life
Look for Twistronics outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Twistronics in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Twistronics means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Twistronics out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Twistronics in simple terms?

Twistronics (from twist and electronics) is the study of how the angle (the twist) between layers of two-dimensional materials can change their electrical properties. Materials such as bilayer graphene have been shown to have vastly different electronic behavior, ranging from non-conductive to supe…

Why does Twistronics matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Twistronics?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Twistronics.

Tags

  • Graphene
  • Superconductivity

Keep exploring