ArticleslgStudy

science

US FWS Albatross III

US FWS Albatross III is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand US FWS Albatross III rather than just read about it. In short: US FWS Albatross III was a fisheries research ship in commission in the United States Fish and Wildlife Service from 1948 to 1959. Prior to her Fish and Wildlife Service career, she operated as the commercial fishing trawler SS Harvard and briefly saw service during World War II as the United States Coast Guard patrol vessel USCGC Bellefonte (WYP-373), in commission from April to August 1944.

US FWS Albatross III — main illustration
US FWS Albatross III — illustration

Key takeaways

  • US FWS Albatross III belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect US FWS Albatross III to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of US FWS Albatross III from memory before moving on to harder problems.

Reference excerpt

US FWS Albatross III was a fisheries research ship in commission in the United States Fish and Wildlife Service from 1948 to 1959. Prior to her Fish and Wildlife Service career, she operated as the commercial fishing trawler SS Harvard and briefly saw service during World War II as the United States Coast Guard patrol vessel USCGC Bellefonte (WYP-373), in commission from April to August 1944. She was wrecked in Cuba as Nyleve in 1969.

Construction and early history

The ship was built in 1926 by Bath Iron Works at Bath, Maine, as the 140-foot (43-meter) commercial steam trawler SS Harvard. Harvard fished the waters off New England until 1939, when the General Seafoods Corporation sold her to the United States Government for $1.00 (USD). She came under the control of the United States Department of the Interior, which assigned her to the U.S. Fish and Wildlife Service for conversion to and operation as the fisheries research ship Albatross III. She was named for USFC/USFS Albatross, a famed fisheries research ship in service with the U.S. Commission of Fish and Fisheries and the U.S. Bureau of Fisheries from 1882 to 1921, and her successor USFS Albatross II, in commission with the U.S. Bureau of Fisheries from 1926 to 1932.

United States Coast Guard service

The United States entered World War II on 7 December 1941. By 1942, Albatross III's conversion was well underway, but patrol vessels were badly needed to deal with threats from German submarines, and she was transferred to the U.S. Coast Guard that year for conversion to a patrol vessel. The United States Navy, which oversaw her conversion for the Coast Guard, made radical changes to the ship, lengthening her to 179 feet (55 meters) overall, removing her trawling equipment, and installing armament and other military equipment. By the time the ship was commissioned into Coast Guard service as the patrol vessel USCGC Bellefonte (WYP-373), the first Coast Guard ship of the name, on 6 April 1944, the submarine threat had largely abated, and Bellefonte, although she had a maerform bow designed for icebreaking, lacked the stability to be used as the Coast Guard had intended. Her brief service as a Coast Guard vessel thus ended on 22 August 1944, when the Coast Guard decommissioned her. The Coast Guard transferred her back to the Fish and Wildlife Service that year.

United States Fish and Wildlife Service career Returning to the name Albatross III, the ship underwent another lengthy process of conversion to transform her from a patrol vessel into a fisheries research ship as previously intended. After this finally was completed, she was commissioned into service with the Fish and Wildlife Service as US FWS Albatross III on 19 March 1948 at the Boston Fish Pier in Boston, Massachusetts.

Fisheries research capabilities Albatross III resembled a Boston trawler, with her deck fitted out in the standard Boston trawler layout, although she was much longer than most such ships. She had an electric trawl winch with 600 fathoms (3,600 feet; 1,100 meters) of 7/8-inch (2.22-cm) wire on each of its two drums, allowing her to trawl in waters up to 200 fathoms (1,200 feet; 370 meters) deep. She had a fish hold with a capacity of 50,000 pounds (22,680 kg) of fish on ice and two freezers, one of which could freeze fish quickly and maintain a temperature of minus 20 degrees F (minus 28.9 degrees C), while the other held temperatures at about 32 degrees F (0 degrees C). Albatross III had two laboratories on her main deck just aft of the trawl winch. One, her wet laboratory, opened onto both the port and starboard decks through Dutch doors, had in its center a stainless steel sink suitable for handling and examining fish, and had two small sinks in cabinets on its outside bulkheads for chemical and hydrographic work. Her other laboratory, a dry laboratory, was aft of the wet laboratory and doubled as a library; it had a large work table, chairs, a bench, and shelves, and early in her career served as an office for scientists conducting the preliminary study of data collected at sea, although it later was filled with electronic equipment related to underwater television research. The ship had hydrographic booms and winches on her bridge deck on both her port and starboard sides. The booms had mechanical travelers to which lowering blocks were attached which regulated the distance of the lowering wire from the rail. Albatross III had accommodations for 35 personnel. Her standard complement was 21 (later reduced to 18) crew members and six scientists, and she had living quarters for an additional eight personnel, either additional crew members or additional scientists, as required on a particular voyage.

… excerpt ends here. Continue reading the full article.

Illustrations

US FWS Albatross III illustration
US FWS Albatross III: SS Harvard
SS Harvard
US FWS Albatross III: USCGC Bellefonte (WYP-373)
USCGC Bellefonte (WYP-373)
US FWS Albatross III: Albatross III tied up.
Albatross III tied up.

Worked examples

Example 1 — a first encounter with US FWS Albatross III

Start with the simplest possible case. Write down what US FWS Albatross III claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to US FWS Albatross III before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about US FWS Albatross III ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of US FWS Albatross III

In research
US FWS Albatross III appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses US FWS Albatross III in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
US FWS Albatross III is common in secondary-school and first-year university syllabi. It links to neighbouring topics 1926 ships, Ships built in Bath, Maine, Ships of the United States Coast Guard, so understanding it makes those chapters shorter.
In everyday life
Look for US FWS Albatross III outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “US FWS Albatross III” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study US FWS Albatross III in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what US FWS Albatross III means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain US FWS Albatross III out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is US FWS Albatross III in simple terms?

US FWS Albatross III was a fisheries research ship in commission in the United States Fish and Wildlife Service from 1948 to 1959. Prior to her Fish and Wildlife Service career, she operated as the commercial fishing trawler SS Harvard and briefly saw service during World War II as the United State…

Why does US FWS Albatross III matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study US FWS Albatross III?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on US FWS Albatross III.

Tags

  • 1926 ships
  • Ships built in Bath, Maine
  • Ships of the United States Coast Guard
  • Ships of the United States Fish and Wildlife Service
  • World War II patrol boats of the United States

Keep exploring