Virtual DOS machines (VDM) refer to a technology that allows running 16-bit/32-bit DOS and 16-bit Windows programs when there is already another operating system running and controlling the hardware.
Overview Virtual DOS machines can operate either exclusively through typical software emulation methods (e.g. dynamic recompilation) or can rely on the virtual 8086 mode of the Intel 80386 processor, which allows real mode 8086 software to run in a controlled environment by catching all operations which involve accessing protected hardware and forwarding them to the normal operating system (as exceptions). The operating system can then perform an emulation and resume the execution of the DOS software. VDMs generally also implement support for running 16-bit and 32-bit protected mode software (DOS extenders), which has to conform to the DOS Protected Mode Interface (DPMI). When a DOS program running inside a VDM needs to access a peripheral, Windows will either allow this directly (rarely), or will present the DOS program with a virtual device driver (VDD) which emulates the hardware using operating system functions. A VDM will systematically have emulations for the Intel 8259A interrupt controllers, the 8254 timer chips, the 8237 DMA controller, etc.
Concurrent DOS 8086 emulation mode In January 1985 Digital Research together with Intel previewed Concurrent DOS 286 1.0, a version of Concurrent DOS capable of running real mode DOS programs in the 80286's protected mode. The method devised on B-1 stepping processor chips, however, in May 1985 stopped working on the C-1 and subsequent processor steppings shortly before Digital Research was about to release the product. Although with the E-1 stepping Intel started to address the issues in August 1985, so that Digital Research's "8086 emulation mode" worked again utilizing the undocumented LOADALL processor instruction, it was too slow to be practical. Microcode changes for the E-2 stepping improved the speed again. This early implementation can be seen as a predecessor to actual virtual DOS machines. Eventually, Concurrent DOS 286 was reworked from a potential desktop operating system to become FlexOS 286 for industrial use in 1986. It was also licensed by IBM for their 4680 OS in 1986. When Intel's 80386 with its virtual 8086 mode became available (as samples since October 1985 and in quantities since June 1986), Digital Research switched to use this to run real mode DOS programs in virtual DOS machines in protected mode under Concurrent DOS 386 1.0 (February 1987) and FlexOS 386 1.0 (June 1987). However, the architecture of these multiuser multitasking protected mode operating systems was not DOS-based by themselves. Concurrent DOS 386 was later developed to become Multiuser DOS (since 1991) and REAL/32 (since 1995). FlexOS 386 later became 4690 OS in 1993.
DOS-based VDMs In contrast to these protected mode operating systems, DOS, by default, is a real-mode operating system, switching to protected mode and virtual 86 mode only on behalf of memory managers and DOS extenders in order to provide access to extended memory or map in memory into the first megabyte, which is accessible to normal DOS programs. DOS-based VDMs appeared with Microsoft's Windows/386 2.01 in September 1987. DOS-based virtual DOS machines were also present in Windows 3.0, 3.1x and Windows for Workgroups 3.1x running in 386 Enhanced Mode as well as in Windows 95, 98, 98 SE and ME. One of the characteristics of these solutions running on top of DOS is that the memory layout shown inside virtual DOS machines are virtual instances of the DOS system and DOS driver configuration run before the multitasker is loaded, and that requests which cannot be handled in protected mode are passed down into the system domain to be executed by the underlying DOS system. Similar to Windows 3.x 386 Enhanced Mode in architecture, EMM386 3.xx of Novell DOS 7, Caldera OpenDOS 7.01, DR-DOS 7.02 (and later) also uses DOS-based VDMs to support pre-emptive multitasking of multiple DOS applications, when the EMM386 /MULTI option is used. This component has been under development at Digital Research / Novell since 1991 under the codename "Vladivar" (originally a separate device driver KRNL386.SYS instead of a module of EMM386). While primarily developed for the next major version of DR DOS, released as Novell DOS 7 in 1994, it was also used in the never released DR DOS "Panther" and "Star Trek" project in 1992/1993.
OS/2 MVDM Multiple virtual DOS machines (MVDM) are used in OS/2 2.0 and later since 1992. OS/2 MVDMs are considerably more powerful than NTVDM. For example, block devices are supported, and various DOS versions can be booted into an OS/2 MVDM. While the OS/2 1.x DOS box was based on DOS 3.0, OS/2 2.x MVDMs emulate DOS 5.0. Seamless integration of Windows 3.1 and later Win32s applications in OS/2 is a concept looking similar on surface to the seamless integration of XP Mode based on Windows Virtual PC in Windows 7. A redirector in a "guest" VDM or NTVDM allows access on the disks of the OS/2 or NT "host". Applications in a "guest" can use named pipes for communication with their "host". Due to a technical limitation, DOS and 16-bit Windows applications under OS/2 were unable to see more than 2 GB of hard drive space; this was fixed in ArcaOS 5.0.4.
Windows NTVDM
… excerpt ends here. Continue reading the full article.
