In aviation, a water landing is, in the broadest sense, an aircraft landing on a body of water. Seaplanes, such as floatplanes and flying boats, land on water as a normal operation. Ditching is a controlled emergency landing on the water surface in an aircraft not designed for the purpose, and it is a very rare occurrence. Controlled flight into the surface and uncontrolled flight ending in a body of water (including a runway excursion into water) are generally not considered water landings or ditching, but are considered accidents. Most times, ditching results in aircraft structural failure.
Aircraft water landings
By design
Seaplanes, flying boats, and amphibious aircraft are designed to take off and land on water. Water-landing can be supported by a hull-shaped fuselage and/or pontoons. The availability of a long effective runway was historically important on lifting size restrictions on aircraft, and their freedom from constructed strips remains useful for transportation to lakes and other remote areas. The ability to loiter on water is also important for marine rescue operations and fire fighting. One disadvantage of water alighting is that it is dangerous in the presence of waves. Furthermore, the necessary equipment compromises the craft's aerodynamic efficiency and speed.
Spacecraft
Early crewed spacecraft launched by the United States were designed to alight on water by the splashdown method. The craft would parachute into the water, which acted as a cushion to bring the craft to a stop. Alighting over water rather than land made braking rockets unnecessary, but its disadvantages included difficult retrieval and the danger of drowning. The NASA Space Shuttle design was intended to land on a runway instead. The SpaceX Dragon uses water landings, and has carried crew since 2020.
In distress
While ditching is extremely uncommon in commercial passenger travel, small aircraft tend to ditch slightly more often because they usually have only one engine and their systems have fewer redundancies. According to the National Transportation Safety Board, there are about a dozen ditchings per year. Reasons for ditching vary, but the most common are engine failure, flat spin, and pilot error.
General aviation General aviation includes all fields of aviation outside of military or scheduled (commercial) flights. This classification includes small aircraft, e.g., training aircraft, airships, gliders, helicopters, and corporate aircraft, including business jets and other for-hire operations. General aviation has the highest accident and incident rate in aviation, with 16 deaths per million flight hours, compared to 0.74 deaths per million flight hours for commercial flights (North America and Europe).
Commercial aircraft In the United States, the FAA does not require commercial pilots to train to ditch but airline cabin personnel must train on the evacuation process. In addition, the FAA implemented rules under which circumstances (kind of operator, number of passengers, weight, route) an aircraft has to carry emergency equipment including floating devices such as life jackets and life rafts. Some aircraft are designed with the possibility of a water landing in mind. Airbus aircraft, for example, feature a "ditching button" which, if pressed, closes valves and openings underneath the aircraft, including the outflow valve, the air inlet for the emergency RAT, the avionics inlet, the extract valve, and the flow control valve. It is meant to slow flooding in a water landing.
Airplane water ditchings
Aircraft landing on water for other reasons
Aircraft also sometimes end up in water by running off the ends of runways, landing in water short of the end of a runway, or even being forcibly flown into the water during suicidal/homicidal events. Twice at LaGuardia Airport, an aircraft has rolled into the East River (USAir Flight 5050 and USAir Flight 405).
… excerpt ends here. Continue reading the full article.
