Water treatment is any process that improves the quality of water to make it appropriate for a specific end-use. The end use may be drinking, industrial water supply, irrigation, river flow maintenance, water recreation or many other uses, including being safely returned to the environment. Water treatment removes contaminants and undesirable components, or reduces their concentration so that the water becomes fit for its desired end-use. This treatment is crucial to human health and allows humans to benefit from both drinking and irrigation use. Advanced water treatment methods have been developed in recent decades due to increased concerns about new pollutants like microplastics, pharmaceuticals, and per- and polyfluoroalkyl substances (PFAS). These include advanced oxidation processes, membrane filtration, and adsorption-based techniques utilizing materials like tailored nanomaterials and activated carbon. Additionally, energy efficiency, resource recovery, and sustainability in water treatment systems are receiving more attention, especially in areas where water is scarce and environmental demands are growing.
Types
Drinking water treatment
Water contamination is primarily caused by the discharge of untreated wastewater from industrial and commercial activities. The effluent from various enterprises, which contains varying levels of contaminants, is dumped into rivers or other water resources. The wastewater may have a high proportion of organic and inorganic contaminants at the initial discharge. Industries generate wastewater as a result of fabrication processes, processes dealing with paper and pulp, textiles, chemicals, and from various streams such as cooling towers, boilers, and production lines. Treatment for drinking water production involves the removal of contaminants and/or inactivation of any potentially harmful microbes from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. In general terms, the greatest microbial risks are associated with ingestion of water that is contaminated with human or animal (including bird) feces. Feces can be a source of pathogenic bacteria, viruses, protozoa and helminths. The removal or destruction of microbial pathogens is essential, and commonly involves the use of reactive chemical agents such as suspended solids, to remove bacteria, algae, viruses, fungi, and minerals including iron and manganese. Research including Professor Linda Lawton's group at Robert Gordon University, Aberdeen is working to improve detection of cyanobacteria. These substances continue to cause great harm to several less developed countries who do not have access to effective water purification systems. Measures taken to ensure water quality not only relate to the treatment of the water, but to its conveyance and distribution after treatment. It is therefore common practice to keep residual disinfectants in the treated water to kill bacteriological contamination during distribution and to keep the pipes clean. Water supplied to domestic properties such as for tap water or other uses, may be further treated before use, often using an in-line treatment process. Such treatments can include water softening or ion exchange.
Wastewater treatment
Industrial water treatment
Processes
For the elimination of hazardous chemicals from the water, many treatment procedures have been applied. The processes involved in removing the contaminants include physical processes such as settling and filtration, chemical processes such as disinfection and coagulation, and biological processes such as slow sand filtration. A combination selected from the following processes (depending on the season and contaminants and chemicals present in the raw water) is used for municipal drinking water treatment worldwide.
Chemical Different chemical procedures for the conversion into final products or the removal of pollutants are used for the safe disposal of contaminants. Pre-chlorination for algae control and arresting biological growth. Aeration along with pre-chlorination for removal of dissolved iron when present with relatively small amounts of manganese. Disinfection for killing bacteria, viruses and other pathogens, using chlorine, ozone and ultra-violet light.
Physical Physical techniques of water/waste water treatment rely on physical phenomena to complete the removal process, rather than biological or chemical changes. Most common physical techniques are:
Sedimentation is one of the most important main wastewater treatment procedures. Gravity settling is a method of separating particles from a fluid. The particle in suspension remains stable in quiescent conditions due to the decrease in water velocity throughout the water treatment process, following which the particles settle by gravitational force. For solids separation that is the removal of suspended solids trapped in the floc. Filtration is the technique of removing pollutants based on their particle size. Pollutant removal from waste water permits water to be reused for a variety of purposes. The types of filters used in the procedure differ depending on the contaminants present in the water. Particle filtration and Membrane filtration are the two main forms of waste water filtration. Dissolved air flotation (Degasification) is the process of removing dissolved gases from a solution. Henry's law states that the amount of dissolved gas in a liquid is proportionate to the partial pressure of the gas. Degasification is a low-cost method of removing carbon dioxide gas from waste water that raises the pH of the water by removing the gas. Deaerator is used to reduce oxygen and nitrogen in boiler feed water applications.
Physico-chemical Also referred to as "Conventional" Treatment
… excerpt ends here. Continue reading the full article.
