A waterfall is any point in a river or stream where water flows over a vertical drop or a series of steep drops. Waterfalls also occur where meltwater drops over the edge of a tabular iceberg or ice shelf. Waterfalls can be formed in several ways, but the most common method of formation is that a river courses over a top layer of resistant bedrock before falling onto softer rock, which erodes faster, leading to an increasingly high fall. Waterfalls have been studied for their impact on species living in and around them. Humans have had a distinct relationship with waterfalls since prehistory, travelling to see them, exploring and naming them. They can present formidable barriers to navigation along rivers. Waterfalls are religious sites in many cultures. Since the 18th century, they have received increased attention as tourist destinations, sources of hydropower, and—particularly since the mid-20th century—as subjects of research.
Definition and terminology A waterfall is generally defined as a point in a river where water flows over a steep drop that is close to or directly vertical. In 2000 Mabin specified that "The horizontal distance between the positions of the lip and plunge pool should be no more than 25% of the waterfall height." There are various types and methods to classify waterfalls. Some scholars have included rapids as a subsection. What actually constitutes a waterfall continues to be debated. Waterfalls are sometimes interchangeably referred to as "cascades" and "cataracts", though some sources specify a cataract as being a larger and more powerful waterfall and a cascade as being smaller. A plunge pool is a type of stream pool formed at the bottom of a waterfall. A waterfall may also be referred to as a "foss" or "force".
Formation
Natural waterfalls are commonly formed in the upper course of a river where lakes flow into valleys in steep mountains. A river sometimes flows over a large step in the rocks that may have been formed by a fault line. Waterfalls can occur along the edge of a glacial trough, where a stream or river flowing into a glacier continues to flow into a valley after the glacier has receded or melted. The large waterfalls in Yosemite Valley are examples of this phenomenon, which is referred to as a hanging valley. Another reason hanging valleys may form is where two rivers join and one is flowing faster than the other. When warm and cold water meets by a gorge in the ocean, large underwater waterfalls can form as the cold water rushes to the bottom. A waterfall is usually defined as being at least five feet high, although most are higher. Mill Pond Falls, in Newington, Connecticut, 12 feet (3.7 m) high, is claimed to be the smallest natural waterfall in the United States. Some sources use a minimum height of 20 feet (6.1 m). A glossary of waterfall terms was published in 1996. There are many different types of waterfalls.
Caprock model The caprock model of waterfall formation states that the river courses over resistant bedrock, erosion happens slowly and is dominated by impacts of water-borne sediment on the rock, while downstream the erosion occurs more rapidly. As the watercourse increases its velocity at the edge of the waterfall, it may pluck material from the riverbed, if the bed is fractured or otherwise more erodible. Hydraulic jets and hydraulic jumps at the toe of a falls can generate large forces to erode the bed, especially when forces are amplified by water-borne sediment. Horseshoe-shaped falls focus the erosion to a central point, also enhancing riverbed change below a waterfall. A process known as "potholing" involves local erosion of a potentially deep hole in bedrock due to turbulent whirlpools spinning stones around on the bed, drilling it out. Sand and stones carried by the watercourse therefore increase erosion capacity. This causes the waterfall to carve deeper into the bed and to recede upstream. Often over time, the waterfall will recede back to form a canyon or gorge downstream as it recedes upstream, and it will carve deeper into the ridge above it. The rate of retreat for a waterfall can be as high as one-and-a-half metres per year. Often, the rock stratum just below the more resistant shelf will be of a softer type, meaning that undercutting due to splashback will occur here to form a shallow cave-like formation known as a rock shelter under and behind the waterfall. Eventually, the outcropping, more resistant cap rock will collapse under pressure to add blocks of rock to the base of the waterfall. These blocks of rock are then broken down into smaller boulders by attrition as they collide with each other, and they also erode the base of the waterfall by abrasion, creating a deep plunge pool in the gorge downstream. Streams can become wider and shallower just above waterfalls due to flowing over the rock shelf, and there is usually a deep area just below the waterfall because of the kinetic energy of the water hitting the bottom. However, a study of waterfalls systematics reported that waterfalls can be wider or narrower above or below a falls, so almost anything is possible given the right geological and hydrological setting. Waterfalls normally form in a rocky area due to erosion. After a long period of being fully formed, the water falling off the ledge will retreat, causing a horizontal pit parallel to the waterfall wall. Eventually, as the pit grows deeper, the waterfall collapses to be replaced by a steeply sloping stretch of river bed. In addition to gradual processes such as erosion, earth movement caused by earthquakes or landslides or volcanoes can lead to the formation of waterfalls.
Ecology
… excerpt ends here. Continue reading the full article.
