ArticleslgStudy

earth science

White Sea

White Sea is a earth science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand White Sea rather than just read about it. In short: The White Sea is a southern inlet of the Barents Sea located on the northwest coast of Russia. It is surrounded by Karelia to the west, the Kola Peninsula to the north, and the Kanin Peninsula to the northeast.

White Sea — main illustration
White Sea — illustration

Key takeaways

  • White Sea belongs to earth science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect White Sea to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of White Sea from memory before moving on to harder problems.

Reference excerpt

The White Sea is a southern inlet of the Barents Sea located on the northwest coast of Russia. It is surrounded by Karelia to the west, the Kola Peninsula to the north, and the Kanin Peninsula to the northeast. The whole of the White Sea is under Russian sovereignty and considered to be part of the internal waters of Russia. Administratively, it is divided between the Arkhangelsk and Murmansk oblasts and the Republic of Karelia. The major port of Arkhangelsk is located on the White Sea. For much of Russia's history this was Russia's main centre of international maritime trade, conducted by the Pomors ("seaside settlers") from Kholmogory. In the modern era it became an important Soviet naval and submarine base. The White Sea–Baltic Canal connects the White Sea with the Baltic Sea. The White Sea is one of the four seas named (not only in English) after common colour terms—the others being the Black, Red and Yellow seas.

Geography

Extent The International Hydrographic Organization defines the northern limit of the White Sea as "A line joining Svyatoy Nos (Murmansk Coast, 39°47'E) and Cape Kanin".

Topography

There are four main bays or gulfs on the White Sea. These bays connect with the funnel-shaped opening to the Barents Sea via a narrow strait called "Gorlo" (Russian: Горло, meaning "throat"). Kandalaksha Gulf lies in the western part of the White Sea; it is the deepest part of the sea, reaching 340 metres (1,115 feet). On the south, Onega Bay receives the Onega River. To the southeast, the Dvina Bay receives the Northern Dvina at the major port of Arkhangelsk. On the east side of the 'gorlo', opposite to the Kola Peninsula, is Mezen Bay. It receives the Mezen River and the Kuloy River. Other major rivers flowing into the sea are the Vyg, Niva, Umba, Varzuga and Ponoy. The seabed of the central part and Dvina Bay is covered in silt and sand, whereas the bottom of the northern part, the Kandalaksha Gulf and Onega Bay is a mixture of sand and stones. Ice age deposits often emerge near the sea shores. Northwestern coasts are tall and rocky but the slope is much weaker at the southeastern side. The White Sea contains a large number of islands, but most of them are small. The main island group is the Solovetsky Islands, located almost in the middle of the sea, near the entrance to Onega Bay. Kiy Island in Onega Bay is significant due to a historic monastery. Velikiy Island, located close to the shore, is the largest island in the Kandalaksha Gulf.

Hydrography and bathymetry The White Sea is a water-filled depression in the block of a continental shelf known as the Baltic Shield. Its bottom is very uneven and contains the Kandalaksha Hollow in the northwest and the Solovetsky Islands in the south. Also, the Onega Bay has many small underwater elevations. The opening and the gorlo of the sea are rather shallow, with depths about 50 metres or less. There is an underwater ridge in the northern part of the gorlo, resulting in maximum depths of 40 metres in that part. This hinders water exchange between the White and Barents seas. The exchange is assisted by the tides, which are semidiurnal (rising twice a day), with the amplitude increasing from 1 metre on the south to 10 metres in Mezen Bay. Currents are rather weak in the open seas with the speed below 1 km/h, but they significantly strengthen in the bays. The tidal waves are much faster than the regular currents and reach the speeds of 9 km/h in Mezen Bay, 3.6 km/h in Onega Bay and 1.3 km/h in the Kandalaksha Gulf. Rivers bring annually about 215 km3 of fresh water, on average, mostly to the Onega, Mezen and Dvina bays. The Northern Dvina alone may contribute up to 171 km3 in some years, with the Mezen, Onega, Kem and Vyg rivers adding up to 38.5, 27.0, 12.5 and 11.5 km3, respectively. About 40% of this volume is brought during the snow melting in May, and the inflow is minimal in February–March. This inflow raises and lowers the sea level that promotes the water exchange with the Barents Sea. As a result, annually, about 2,000 km3 and 2,200 km3 flow in and out of the White Sea, respectively. The inflow of fresh water in spring decreases the surface salinity in the top 5–10-metre layer to 23‰ (parts per thousand) in the eastern and 26–27‰ in the western parts of the sea, reaching 10–12‰ in Dvina Bay; it also increases the content of silicon and silicates in water, which is a characteristic feature of the White Sea. Storms are the strongest in October–November. Shallow sea depths reduce the wave height to the average of 1 metre, sometimes reaching 3–5 metres. The sea is quiet in July–August.

Climate

… excerpt ends here. Continue reading the full article.

Illustrations

White Sea illustration
White Sea: Summer day on a beach near Severodvinsk, on the southeastern shore of the sea
Summer day on a beach near Severodvinsk, on the southeastern shore of the sea
White Sea: Kandalaksha Gulf
Kandalaksha Gulf
White Sea: Shore of Onega Bay on Kiy Island
Shore of Onega Bay on Kiy Island
White Sea: Two satellite photos of the White Sea taken on 23 April 2000 (top) and 3 May 2001 (bottom)
Two satellite photos of the White Sea taken on 23 April 2000 (top) and 3 May 2001 (bottom)

Worked examples

Example 1 — a first encounter with White Sea

Start with the simplest possible case. Write down what White Sea claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In earth science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to White Sea before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about White Sea ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of White Sea

In research
White Sea appears in earth science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses White Sea in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
White Sea is common in secondary-school and first-year university syllabi. It links to neighbouring topics Bodies of water of the Barents Sea, European seas, Seas of Russia, so understanding it makes those chapters shorter.
In everyday life
Look for White Sea outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study White Sea in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what White Sea means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain White Sea out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is White Sea in simple terms?

The White Sea is a southern inlet of the Barents Sea located on the northwest coast of Russia. It is surrounded by Karelia to the west, the Kola Peninsula to the north, and the Kanin Peninsula to the northeast.

Why does White Sea matter?

Because it connects several earth science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study White Sea?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on White Sea.

Tags

  • Bodies of water of the Barents Sea
  • European seas
  • Seas of Russia
  • Seas of the Arctic Ocean
  • White Sea

Keep exploring