ArticleslgStudy

science

Wireless telegraphy

Wireless telegraphy is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Wireless telegraphy rather than just read about it. In short: Wireless telegraphy or radiotelegraphy is the transmission of text messages by radio waves, analogous to electrical telegraphy using cables. Before about 1910, the term wireless telegraphy was also used for other experimental technologies for transmitting telegraph signals without wires.

Wireless telegraphy — main illustration
Wireless telegraphy — illustration

Key takeaways

  • Wireless telegraphy belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Wireless telegraphy to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Wireless telegraphy from memory before moving on to harder problems.

Reference excerpt

Wireless telegraphy or radiotelegraphy is the transmission of text messages by radio waves, analogous to electrical telegraphy using cables. Before about 1910, the term wireless telegraphy was also used for other experimental technologies for transmitting telegraph signals without wires. In radiotelegraphy, information is transmitted by pulses of radio waves of two different lengths called "dots" and "dashes", which spell out text messages, usually in Morse code. In a manual system, the sending operator taps on a switch called a telegraph key which turns the transmitter on and off, producing the pulses of radio waves. At the receiver the pulses are audible in the receiver's speaker as beeps, which are translated back to text by an operator who knows Morse code. Radiotelegraphy was the first means of radio communication, with the first practical radio transmitters and receivers invented in 1894–1895 by Guglielmo Marconi. Beginning about 1908, powerful transoceanic radiotelegraphy stations transmitted commercial telegram traffic between countries at rates up to 200 words per minute. Wireless telegraphy was initially perceived as analogous to electric telegraphy, given its reliance on Morse code, and therefore mistakenly seen as a secure point-to-point channel of communication. The broadcasting function of wireless received conflicting reviews persisting on its nature and purpose well into the 1920s. Wireless telegraphy is often viewed as a predecessor to Radio broadcasting, that sprang after the World War I with development of amplitude modulation (AM) inradiotelephony that allowed sound (audio) and acknowledgement of importance of propagating features of wireless. Radiotelegraphy was used for long-distance person-to-person commercial, diplomatic, and military text communication throughout the first half of the 20th century. It became a strategically important capability during the two world wars since a nation without long-distance radiotelegraph stations could be isolated from the rest of the world by an enemy cutting its submarine telegraph cables. Radiotelegraphy remains popular in amateur radio. It is also taught by the military for use in emergency communications. However, by the 1950s commercial radiotelegraphy was replaced by radioteletype networks and is obsolete.

Principles

Wireless telegraphy or radiotelegraphy, commonly called CW (continuous wave), ICW (interrupted continuous wave) transmission, or on-off keying, and designated by the International Telecommunication Union as emission type A1A or A2A, is a radio communication method. It was transmitted by several different modulation methods during its history. The primitive spark-gap transmitters used until 1920 transmitted damped waves, which had very wide bandwidth and tended to interfere with other transmissions. This type of emission was banned by 1934, except for some legacy use on ships. The vacuum tube (valve) transmitters which came into use after 1920 transmitted code by pulses of unmodulated sinusoidal carrier wave called continuous wave (CW), which is still used today. To receive CW transmissions, the receiver requires a circuit called a beat frequency oscillator (BFO). The third type of modulation, frequency-shift keying (FSK) was used mainly by radioteletype networks (RTTY). Morse code radiotelegraphy was gradually replaced by radioteletype in most high volume applications by World War II. In manual radiotelegraphy the sending operator manipulates a switch called a telegraph key, which turns the radio transmitter on and off, producing pulses of unmodulated carrier wave of different lengths called "dots" and "dashes", which encode characters of text in Morse code. At the receiving location, Morse code is audible in the receiver's earphone or speaker as a sequence of buzzes or beeps, which is translated back to text by an operator who knows Morse code. With automatic radiotelegraphy teleprinters at both ends use a code such as the International Telegraph Alphabet No. 2 and produce typed text. Radiotelegraphy is obsolete in commercial radio communication, and its last civilian use, requiring maritime shipping radio operators to use Morse code for emergency communications, ended in 1999 when the International Maritime Organization switched to the satellite-based GMDSS system. However it is still used by amateur radio operators, and military services require signalmen to be trained in Morse code for emergency communication. A CW coastal station, KSM, still exists in California, run primarily as a museum by volunteers, and occasional contacts with ships are made. In a minor legacy use, VHF omnidirectional range (VOR) and NDB radio beacons in the aviation radio navigation service still transmit their one to three letter identifiers in Morse code. Radiotelegraphy is popular amongst radio amateurs world-wide, who commonly refer to it as continuous wave, or just CW. A 2021 analysis of over 700 million communications logged by the Club Log blog, and a similar review of data logged by the American Radio Relay League, both show that wireless telegraphy is the 2nd most popular mode of amateur radio communication, accounting for nearly 20% of contacts. This makes it more popular than voice communication, but not as popular as the FT8 digital mode, which accounted for 60% of amateur radio contacts made in 2021. Since 2003, knowledge of Morse code and wireless telegraphy has no longer been required to obtain an amateur radio license in many countries, it is, however, still required in some countries to obtain a licence of a different class. As of 2021, licence Class A in Belarus and Estonia, or the General class in Monaco, or Class 1 in Ukraine require Morse proficiency to access the full amateur radio spectrum including the high frequency (HF) bands. Further, CEPT Class 1 licence in Ireland, and Class 1 in Russia, both of which require proficiency in wireless telegraphy, offer additional privileges: a shorter and more desirable call sign in both countries, and the right to use a higher transmit power in Russia.

History

… excerpt ends here. Continue reading the full article.

Illustrations

Wireless telegraphy: A US Army Signal Corps radio operator in 1943 in New Guinea transmitting by radiotelegraphy
A US Army Signal Corps radio operator in 1943 in New Guinea transmitting by radiotelegraphy
Wireless telegraphy illustration
Wireless telegraphy illustration
Wireless telegraphy illustration
Wireless telegraphy illustration

Worked examples

Example 1 — a first encounter with Wireless telegraphy

Start with the simplest possible case. Write down what Wireless telegraphy claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Wireless telegraphy before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Wireless telegraphy ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Wireless telegraphy

In research
Wireless telegraphy appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Wireless telegraphy in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Wireless telegraphy is common in secondary-school and first-year university syllabi. It links to neighbouring topics History of radio technology, Radio operators, Telegraphy, so understanding it makes those chapters shorter.
In everyday life
Look for Wireless telegraphy outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Wireless telegraphy” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Wireless telegraphy in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Wireless telegraphy means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Wireless telegraphy out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Wireless telegraphy in simple terms?

Wireless telegraphy or radiotelegraphy is the transmission of text messages by radio waves, analogous to electrical telegraphy using cables. Before about 1910, the term wireless telegraphy was also used for other experimental technologies for transmitting telegraph signals without wires.

Why does Wireless telegraphy matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Wireless telegraphy?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Wireless telegraphy.

Tags

  • History of radio technology
  • Radio operators
  • Telegraphy
  • Wireless communication systems

Keep exploring